Product creation and device programming

Welcome to OnBoard™ IoT Security (OBIS)! This article provides a quick-start guide for the following steps:

• Creating and configuring a product
• Creating a version and batch
• Assigning a programming station to the batch and completing device programming

By following these steps, you'll quickly get started with OBIS and complete the entire process—from product creation to device programming.

Prerequisites

Before starting product creation and device programming, ensure that the following conditions are met:

• Your account has the permissions to complete the process—from product creation to device programming in OBIS.

• Contact Snowball to obtain the HSM U-Safe and Identity U-Safe.

• You have completed the creation and configuration of the factory. For detailed instructions, refer to the following steps:

  • Creating a factory
  • Configuring a factory (local factory & cloud factory)
  • Configuring a programming station (local factory & cloud factory)

Operational diagram

Step one: Create and configure a product

Refer to the steps below to create and configure your product in OBIS:

1. Sign in to OBIS.

2. In the Core section of the left menu, click Product, and then click Create.

   

3. On the Create Product panel, enter the required basic information:

   • Product Name
   • Vendor
   • Max.Volume

   Then, click Create. After your product is created, the page will navigate to the product page.

   note

   For more information, refer to the description of product basic information.

   

4. Select either the TEST or PROD environment on the product page, select the Overview tab, locate the Assets section. Then, select and configure the required assets:

   • Chip Config
   • Certificates
   • Firmware
   • Matter Config
   • Factory Data
   
   
   tip

   The configurations of the Assets section will be used for version and batch creation. For more information, refer to the steps for configuring a product.

   

   Chip Config

   tip

   Chip Config allows you to select the chip part and security options used by your product.

   Please refer to the supported chip settings for the current list. Additional chip vendors, series, and parts will be added based on demand.

   For more information, refer to the steps for setting Chip Config.

   In the Chip Config section, click the Options icon and then select Edit. Select the Vendor, Series, and Part, and then click Save.

   

   Certificates

   tip

   Certificates allows you to add a DAC template from PKI to your product, making it available for selection during the Matter Config.

   DAC templates can be created in PKI. For more information, refer to the steps for creating a certificate.

   In the Certificates section, click Add. Then, select the certificate to be assigned and click Add.

   

   Firmware

   tip

   Firmware allows you to upload the firmware files required for programming the product. Firmware formats supported: .bin, .hex, and .s37. Then, the uploaded firmware can be selected when creating a version. You may upload firmware as needed.

   1. In the Firmware section, click Add.

      

   2. In the Add Firmware window, upload the firmware files and select Firmware Type (Application or Bootloader), and then click Add.

      note

      For more information, refer to the description of Firmware information.

      

   Matter Config

   tip

   Matter Config allows you to select and configure settings related to the Matter protocol.

   In this step, you need to upload the CD file and select the DAC template that was added when configuring Certificates. Please ensure that the VID (Vendor ID) and PID (Product ID) in the CD file match those in the DAC template.

   You can replace the CD file as needed when creating a version later.

   For more information, refer to the description of Matter Config information.

   In the Matter Config section, click the Options icon and then select Edit. Click Upload File to select and upload the CD file. Then, select DAC Template, PID, Commissioning Flow, Spake2Iteration, and Discovery Mode, and click Save.

   

   Factory Data

   tip

   Factory Data allows you to configure factory-related information and supports all fields required by the Matter specification. You can update the Factory Data as needed when creating a version later.

   The Factory Data selected here will be used as a required field when creating a version. For more information, refer to the description of Factory Data information.

   In the Factory Data section, click the Options icon and then select Edit. Enter the Factory Data for your product (values can be left empty), and then click Save.

   

5. In the Programming Script section of the Assets tab, upload the corresponding files.

   note

   Files in the Programming Script section will be used for batch creation. For more information, refer to the steps for configuring Programming Script.

   For example, refer to the steps below to upload a programming script.

   tip

   Programming Script allows you to upload script files used for device programming (any script format is supported). The uploaded programming script can be selected when creating a batch.

   You can select and upload the programming script as needed. If it is not required at the moment, you can also select it for a specific batch later in the Programming Station client.

   1. In the Programming Script section, click Add.

      

   2. In the Add Programming Script window, upload the script file and click Add.

      

Step two: Create a version

tip

Each product can create multiple versions.

After your product is created and configured, refer to the steps below to create a version in OBIS:

1. On the product page, select the Version tab, and then click Create. The page will navigate to the Create Version tab.

   tip

   If the Create button appears grayed out, it is currently unavailable. Please check whether all required assets for your product have been configured. Once everything is properly configured, the Create button will be enabled automatically.

   

2. On the Create Version tab:

   note

   For more information, refer to the description of version information.

   1. Enter the Version Name.

   2. Check the information in the Chip Config, Firmware, Matter Config, and Factory Data sections.

   3. Click Create. After the version is created, the page will navigate to the Version tab.

      

Step three: Create a batch

tip

Each version can create multiple batches, and a batch represents a production plan based on that version.

After the version is created, refer to the steps below to create a batch in OBIS:

1. On the product page, select the Batch tab, and then click Create. The page will navigate to the Create Batch tab.

   tip

   If the Create button appears grayed out, it is currently unavailable. Please check whether a version has been created. After a version is created, the Create button will be enabled automatically.

   

2. On the Create Batch tab:

   note

   For more information, refer to the description of batch information.

   1. Enter the batch name, select the version created in step two.

      

   2. In the Advanced Information section:

      • Select the Factory
      • Enter the Batch Volume
      • Set the Expiry Time
      • Select the Programming Script (add the programming script uploaded when configuring your product as needed. If it is not required at the moment, you can select the programming script for a specific batch later in the Programming Station client).

      

   3. Click Create. After the batch is created, the page will navigate to the Batch tab.

Step four: Assign a programming station to the batch

tip

The purpose of assigning a programming station to a batch is to bind the production plan to a programming station.

Local Factory

Contact Snowball for assistance in deploying the OnBoard Edge Service on the factory side.

After the deployment is complete, you can sign in to the OnBoard Edge Service using the generated service address to manage factories, programming stations, and batches:

1. Sign in to OnBoard Edge Service.

2. In the left menu, click Batch, and then select the batch created in step three from the Batch List.

3. On the batch page, verify that the batch status is Running, and then select a programming station with the Available status for assignment.

   note

   For more information, refer to the steps for adding a programming station.

   

Cloud Factory

1. Sign in to OBIS.

2. In the Ecosystem section of the left menu, click Factory, and then select the corresponding factory to navigate to the factory page and select the Batch tab.

3. Select the batch created in step three, verify that the batch status is Running, and then select a programming station with the Available status for assignment.

   note

   For more information, refer to the steps for adding a programming station.

   

Step five: Device programming

Programming Station is a client for device programming. After assigning a programming station to the batch in the OnBoard Edge Service, refer to the steps below to start programming:

1. Install and sign in to the Programming Station client, verify that the device status is Ready.

   tip

   If the programming script is not selected when creating a batch, or if you want to select a different programming script, you can click the Folder icon to select the required programming script (any script format is supported).

   

2. In the main window, select the Channel Configuration tab and then set the number of programmer connections in the Layout area as needed.

   tip

   The number of connections determines how many devices can be programmed simultaneously. The system currently supports a number of connections based on the product of rows and columns in the layout area, which must satisfy the following conditions:

   • Both rows and columns must be integers.
   • Rows × Columns ≤ 24.
   • Neither rows nor columns may exceed 16.
   • If the number of rows exceeds 4, the number of columns can only be 1 or 2.

   

3. In the main window of the Programming Station client, click Start to execute device programming.

   

4. After programming is completed, click the corresponding port to check the device programming details.

   tip

   You can also check the device profile and related log information in OnBoard™ IoT Security (OBIS).